Due to the law, we cannot accept ship to following countries.
Australia, China, Malaysia, Singapore, Korea, Russia
The refund amount from us will be deducted 4% Paypal fee. If you remit the money without confirming this issue,
PROMETHEUS STRAIGHT CHAMBER PACKING (SOFT)
Chamber packing for AEG provided by Japanese parts manufacturer “LAYLAX”.
This is a chamber packing for flat Hop-up, and it has no internal protrusion for Hop-up. Therefore, it can not be used when using a normal Hop-up tensioner.
This product is a soft type that is compatible with the flat Hop-up tensioner.
Contents
Chamber packing x 1
Cautions
There is a protrusion in the packing. When using a surface HOP tensioner, be sure to use a flat surface such as a Magnus barrel.
Although it can be used for most AEGs, airtight leaks, clogging and double-feed may occur depending on the model and manufacturer.
Please compare with genuine chamber packing when replacing.
From LAYLAX HP
This item is a flat HOP, allowing you to rotate the HOP longer and shallower with a small HOP protrusion. By doing so, it is a packing aimed at suppressing energy loss that becomes resistance when passing BB bullets.
It is also recommended for High-power setting and can be used with PROMETHEUS “Hop-up tensioner series” to improve performance!
What is HOP?
It is a system that uses the lift generated by rotating the BB bullet to extend the fright distance without increasing the power. This is usually has a small protrusion on he fulcrum in the inner barrel. By doing so, BB ballets collide with this part and rotate, and Hop-up occurs. Depending on the protruding amount of this protrusion and the wight of the BB bullet, the fright distance will increase and decrease, and the trajectory will also change.
-Advantages
Expected to improve fright distance and accuracy.
-Disadvantages
It is for intermediate to advanced users who know the structure and mechanism of an AEG.
More frequent maintenance than usual.
Compatible models
Tokyo Marui’s AEG
PROMETHEUS “DELTA STRIKE BARREL” installed model
Models with low HOP protrusion
What is PROMETHEUS?
Custom parts series dedicated to AEGs provided by LAYLAX.
Each part is reconstructed from various viewpoints based on myths, and the roles assigned to each part are maximized. Moreover, it is a custom parts series dedicated to AEG that aims to bring out the total power to120%.
The role of Chamber packing
This is used over the inner barrel.
In addition to rotating the BB bullets by HOP, there are also roles such as airtight maintenance of the inner barrel and nozzle, and prevention of double-feed of BB bullets.
About the hardness of chamber packing
There is a lineup of different hardness in the external chamber packing.
The coefficient of friction increase as it hardens. As a result, a powerful rotation can be applied to the BB bullet, making it suitable for heavy bullets.
Please note that if it is too hard, it will cause clogging.
When using a surface HOP tensioner, the area where it descends is large, so if the material is hard, the HOP will not descend on the surface. Therefore, we recommend a soft type.
PROMETHEUS STRAIGHT CHAMBER PACKING (SOFT)
Chamber packing for AEG provided by Japanese parts manufacturer “LAYLAX”.This is a chamber packing for flat Hop-up, and it has no internal protrusion for Hop-up. Therefore, it can not be used when using a normal Hop-up tensioner.
This product is a soft type that is compatible with the flat Hop-up tensioner.
Contents
Chamber packing x 1Cautions
There is a protrusion in the packing. When using a surface HOP tensioner, be sure to use a flat surface such as a Magnus barrel.Although it can be used for most AEGs, airtight leaks, clogging and double-feed may occur depending on the model and manufacturer.
Please compare with genuine chamber packing when replacing.
From LAYLAX HP
This item is a flat HOP, allowing you to rotate the HOP longer and shallower with a small HOP protrusion. By doing so, it is a packing aimed at suppressing energy loss that becomes resistance when passing BB bullets.It is also recommended for High-power setting and can be used with PROMETHEUS “Hop-up tensioner series” to improve performance!
What is HOP?
It is a system that uses the lift generated by rotating the BB bullet to extend the fright distance without increasing the power. This is usually has a small protrusion on he fulcrum in the inner barrel. By doing so, BB ballets collide with this part and rotate, and Hop-up occurs. Depending on the protruding amount of this protrusion and the wight of the BB bullet, the fright distance will increase and decrease, and the trajectory will also change.-Advantages
Expected to improve fright distance and accuracy.
-Disadvantages
It is for intermediate to advanced users who know the structure and mechanism of an AEG.
More frequent maintenance than usual.
Compatible models
Tokyo Marui’s AEGPROMETHEUS “DELTA STRIKE BARREL” installed model
Models with low HOP protrusion
What is PROMETHEUS?
Custom parts series dedicated to AEGs provided by LAYLAX.Each part is reconstructed from various viewpoints based on myths, and the roles assigned to each part are maximized. Moreover, it is a custom parts series dedicated to AEG that aims to bring out the total power to120%.
The role of Chamber packing
This is used over the inner barrel.In addition to rotating the BB bullets by HOP, there are also roles such as airtight maintenance of the inner barrel and nozzle, and prevention of double-feed of BB bullets.
About the hardness of chamber packing
There is a lineup of different hardness in the external chamber packing.The coefficient of friction increase as it hardens. As a result, a powerful rotation can be applied to the BB bullet, making it suitable for heavy bullets.
Please note that if it is too hard, it will cause clogging.
When using a surface HOP tensioner, the area where it descends is large, so if the material is hard, the HOP will not descend on the surface. Therefore, we recommend a soft type.