MAPLE LEAF HOP-UP TENSIONER for AEG

This is a Hop-up rubber for hanging the Hop-up for AEG.
It is a surface Hop-up type and the trajectory is stable.

Feature of this product

This product is a rubber used for AEG Hop-up.
The part through which the bullet passes has a Round-shape, and the bullet passes through the center each time. Therefore, it is possible to make a stable rotation.

Cautions

When using the surface Hop-up rubber, if there is a protrusion(rotating the bullet) inside the chamber packing, it will not be a surface because of the protrusion even if it is pressed on the surface. Therefore, please use chamber packing without protrusions, or remove the protrusions, or use an inner barrel that can store Hop-up protrusions like ORGA original barrel.
Magnus Barrel List
Magnus HD Barrel List
LEX05 Barrel List

When using this product in the ORGA Magnus Barrel Series(for AEG), it can be used without processing(depending on the size of the chamber opening). However, in the case of other company’s genuine inner barrel, it may be necessary to widen the Hop-up window.

The role of the Hop-up rubber(tensioner)

Hop-up rubber is a part for applying rotation to BB bullets.
When the Hop-up arm built into the chamber is pushed downward and the chamber packing is pushed, the upper part of the bullet path protrudes and rotates upward.

About Surface Hop-up

A normal Hop-up rubber pushes the chamber packing with a cylindrical rubber. Therefore, when he bullet passes, the BB bullet is rotated at the point.
On the other hand, the surface Hop-up can rotate the BB bullet with a line by pressing the chamber packing on the surface, stabilizing the bullet rotation speed and improving the Accuracy.

---

Please do not hesitate to contact us with any questions.