Due to the law, we cannot accept ship to following countries.
Australia, China, Malaysia, Singapore, Korea, Russia
The refund amount from us will be deducted 4% Paypal fee. If you remit the money without confirming this issue,
About Products
we have ORGA AIRSOFT Japan WebShop, we has many times more products in Japan web shop and our overseas staff help your request.
Please feel free to CONTACT US if you have any items you would like. https://orga-inc.jp
PDI W-HOLD CHAMBER PACKING for AEG
Chamber packing provided by Japanese parts manufacturer PDI.
From PDI HP
We have developed a W-hold- shaped Hop up rib chamber packing that is easy to control.
This product is a PDI original design chamber packing. It has toughness, flexible design, an original concept that reduce air loss and high maintainability.
It has a “W-hold” shaped Hop up rib that holds the BB bullets at two points, thereby bringing out stable accuracy.
It uses domestic nitrile rubber with a hardness of 50, which is recommended for those who have difficulty with ballistic adjustment when packing is easily affected by temperature differences. It has excellent oil resistance, wears resistance, and tear strength by reducing the hardness compared to
Tokyo Marui genuine chamber packing. Besides, it can be used flexibly and has an almighty side.
Compatible models
-Tokyo Marui’s AEG various inner barrel
-Tokyo Marui’s next-generation AEG various inner barrel
Cautions
There is a protrusion in the packing. When using a surface HOP tensioner, be sure to use a flat surface such as a Magnus barrel.
Although it can be used for most AEGs, airtight leaks, clogging and double-feed may occur depending on the model and manufacturer.
Please compare with genuine chamber packing when replacing.
The role of Chamber packing
This is used over the inner barrel.
In addition to rotating the BB bullets by HOP, there are also roles such as airtight maintenance of the inner barrel and nozzle, and prevention of double-feed of BB bullets.
About the hardness of chamber packing
There is a lineup of different hardness in the external chamber packing.
The coefficient of friction increase as it hardens. As a result, a powerful rotation can be applied to the BB bullet, making it suitable for heavy bullets.
Please note that if it is too hard, it will cause clogging.
When using a surface HOP tensioner, the area where it descends is large, so if the material is hard, the HOP will not descend on the surface. Therefore, we recommend a soft type.
PDI W-HOLD CHAMBER PACKING for AEG
Chamber packing provided by Japanese parts manufacturer PDI.From PDI HP
We have developed a W-hold- shaped Hop up rib chamber packing that is easy to control.This product is a PDI original design chamber packing. It has toughness, flexible design, an original concept that reduce air loss and high maintainability.
It has a “W-hold” shaped Hop up rib that holds the BB bullets at two points, thereby bringing out stable accuracy.
It uses domestic nitrile rubber with a hardness of 50, which is recommended for those who have difficulty with ballistic adjustment when packing is easily affected by temperature differences. It has excellent oil resistance, wears resistance, and tear strength by reducing the hardness compared to
Tokyo Marui genuine chamber packing. Besides, it can be used flexibly and has an almighty side.
Compatible models
-Tokyo Marui’s AEG various inner barrel-Tokyo Marui’s next-generation AEG various inner barrel
Cautions
There is a protrusion in the packing. When using a surface HOP tensioner, be sure to use a flat surface such as a Magnus barrel.Although it can be used for most AEGs, airtight leaks, clogging and double-feed may occur depending on the model and manufacturer.
Please compare with genuine chamber packing when replacing.
The role of Chamber packing
This is used over the inner barrel.In addition to rotating the BB bullets by HOP, there are also roles such as airtight maintenance of the inner barrel and nozzle, and prevention of double-feed of BB bullets.
About the hardness of chamber packing
There is a lineup of different hardness in the external chamber packing.The coefficient of friction increase as it hardens. As a result, a powerful rotation can be applied to the BB bullet, making it suitable for heavy bullets.
Please note that if it is too hard, it will cause clogging.
When using a surface HOP tensioner, the area where it descends is large, so if the material is hard, the HOP will not descend on the surface. Therefore, we recommend a soft type.