Due to the law, we cannot accept ship to following countries.
USA, Australia, China, Malaysia, Singapore, Korea, Russia
The refund amount from us will be deducted 4% Paypal fee. If you remit the money without confirming this issue,
KING ARMS HOP-UP CHAMBER for M4
This is a Hop-up chamber for M4 series conventional AEG made by popular overseas manufacturer KING ARMS.
Feature of this product
This is a chamber with high accuracy by machining aluminum.
It is used for M4 AEG by KING ARMS. Therefore, it can be used not only as a replacement part for the KING ARMS’s M4 AEG but also for M4 AEG made by other manufacturers.
Compatible models
You can use it for various M16/M4/HK416 conventional AEG using Ver.2 Gearbox.
It is not available for Tokyo Marui STD AEG genuine frame (upper and lower split chamber specification) and next-generation AEG.
This product may cause interference or rattle depending on the frame to be installed. In that case, please adjust the rubbing.
Contents
-Chamber body(Aluminum)
-Spring for the chamber position tension
-Hop-up arm
-Hop-up arm axis
-Hop-up arm spring
-Inner barrel fixing clip
-Hop-up dial fixing clip
-Hop-up dial(with fixing screw)
-Idle gear(with retaining ring)
-2 types of O-ring
The role of the Chamber
The role of the chamber in the AEG is very important.
1.BB bullet is sent from the magazine.
2.Send BB bullets into the inner barrel with a nozzle.
3.Air is ejected from the nozzle and fires a BB bullet.
4.Rotate the BB bullet with Hop-up.
All of the above processes are performed in the chamber.
There are many important points, and the following is an example.
-Passing the BB bullet is smooth.
-The nozzle moves smoothly and keeps airtight with the chamber packing.
-Fix the position of the inner barrel and keep it airtight.
-A condition of Hop-up spin
It is recommended that you do not use bad chambers, as performance will be reduced if any topic is missing.
Please do not hesitate to contact us with any questions.
KING ARMS HOP-UP CHAMBER for M4
This is a Hop-up chamber for M4 series conventional AEG made by popular overseas manufacturer KING ARMS.Feature of this product
This is a chamber with high accuracy by machining aluminum.It is used for M4 AEG by KING ARMS. Therefore, it can be used not only as a replacement part for the KING ARMS’s M4 AEG but also for M4 AEG made by other manufacturers.
Compatible models
You can use it for various M16/M4/HK416 conventional AEG using Ver.2 Gearbox.It is not available for Tokyo Marui STD AEG genuine frame (upper and lower split chamber specification) and next-generation AEG.
This product may cause interference or rattle depending on the frame to be installed. In that case, please adjust the rubbing.
Contents
-Chamber body(Aluminum)-Spring for the chamber position tension
-Hop-up arm
-Hop-up arm axis
-Hop-up arm spring
-Inner barrel fixing clip
-Hop-up dial fixing clip
-Hop-up dial(with fixing screw)
-Idle gear(with retaining ring)
-2 types of O-ring
The role of the Chamber
The role of the chamber in the AEG is very important.1.BB bullet is sent from the magazine.
2.Send BB bullets into the inner barrel with a nozzle.
3.Air is ejected from the nozzle and fires a BB bullet.
4.Rotate the BB bullet with Hop-up.
All of the above processes are performed in the chamber.
There are many important points, and the following is an example.
-Passing the BB bullet is smooth.
-The nozzle moves smoothly and keeps airtight with the chamber packing.
-Fix the position of the inner barrel and keep it airtight.
-A condition of Hop-up spin
It is recommended that you do not use bad chambers, as performance will be reduced if any topic is missing.
Please do not hesitate to contact us with any questions.