VFC M4 SWITCH WIRING SET REAR WIRING

This product is a set of VFC genuine switch, wiring and motor terminal.
It is a replacement part for switch contacts that are subject to wear.
It has already been wired. There is no need to solder, cut wires, or incorporate motor terminals.

Compatible models

This product can be used for the VFC M4 series (Ver.2 Gearbox).
If it is normal Ver.2 gearbox, it can be used by manufacturers other than VFC.

Cautions

This product may not work well depending on the Gearbox, trigger and cut-off lever used. In that case, it is necessary to rub together.
Moreover, Semi-Auto troubles may occur.

Please use it with VFC wiring connector set ver.2 system.

The role of the switch

The role of the switch in the AEG is to control ON/OFF when electricity from the battery flows to the motor.
It is a mechanism that energizes when the switch is pushed by the trigger.
If you roughly classify the switch, there are analog type, micro switch, electric trigger, and so on.
In the case of analog type or micro switch, it is possible to greatly prevent the switch contact from melting by spark at ON/OFF by using FET or SBD.

---