Due to the law, we cannot accept ship to following countries.
Australia, China, Malaysia, Singapore, Korea, Russia
The refund amount from us will be deducted 4% Paypal fee. If you remit the money without confirming this issue,
ORGA MAGNUS PISTON HEAD for NEXT-GENERATION AEG
This is a rear intake type piston head for the Magnus cylinder included with the Magnus cylinder set.
Please use it as a replacement for damage or less.
Contents
-Piston head body
-O-ring
-Guide(Silver)
-End cap(Black)
-fixing screw
Compatible models
-Magnus cylinder set for Next-generation AEG
*STD/M14/Long Gearbox are unavailable.
Precautions when installing
Insert the end cap(black part) into the guide after fixing the piston head.
In that case, please face the convex side toward the tip(piston head body side).
If the convex side is directed backwards, it may collide with the recoil shaft and lock.
The role of the Piston head
The piston head is a part that is attached to the piston. It is kept airtight in the cylinder by installing an O-ring.
When the piston moves forward, it is a part of flying BB bullets by compressing and discharging the air in the cylinder.
What is a rear intake type piston head?
When the piston head is viewed from the front, there are 6 or 8 holes along with the outer shell. Such a piston head is called a rear intake type.
Because of this hole, the O-ring bulges outward when the piston moves forward, making the cylinder tighter.
Conversely, when the piston is retracted, air can be sucked not only from the nozzle tip but also from the rear of the cylinder.
Since the genuine Tokyo Marui normal piston does not have this hole, intake is only from the nozzle tip. For this reason, when a bullet is clogged, the nozzle tip is blocked and intake is not possible. This phenomenon causes trouble.
ORGA MAGNUS PISTON HEAD for NEXT-GENERATION AEG
This is a rear intake type piston head for the Magnus cylinder included with the Magnus cylinder set.Please use it as a replacement for damage or less.
Contents
-Piston head body-O-ring
-Guide(Silver)
-End cap(Black)
-fixing screw
Compatible models
-Magnus cylinder set for Next-generation AEG*STD/M14/Long Gearbox are unavailable.
Precautions when installing
Insert the end cap(black part) into the guide after fixing the piston head.In that case, please face the convex side toward the tip(piston head body side).
If the convex side is directed backwards, it may collide with the recoil shaft and lock.
The role of the Piston head
The piston head is a part that is attached to the piston. It is kept airtight in the cylinder by installing an O-ring.When the piston moves forward, it is a part of flying BB bullets by compressing and discharging the air in the cylinder.
What is a rear intake type piston head?
When the piston head is viewed from the front, there are 6 or 8 holes along with the outer shell. Such a piston head is called a rear intake type.Because of this hole, the O-ring bulges outward when the piston moves forward, making the cylinder tighter.
Conversely, when the piston is retracted, air can be sucked not only from the nozzle tip but also from the rear of the cylinder.
Since the genuine Tokyo Marui normal piston does not have this hole, intake is only from the nozzle tip. For this reason, when a bullet is clogged, the nozzle tip is blocked and intake is not possible. This phenomenon causes trouble.