Tokyo Marui Next Gen MP5 SD6 AEG

The MP5 SD6 is now available as a Next Gen electric gun equipped with a silencer as standard equipment!
Equipped with the M-SYSTEM which uses FET (electronic trigger system) which comprehensively monitors and controls the FET, FC, battery, and motor for safety using a microcontroller. The gun also features three-burst reproduction, improved trigger response, and compatibility with the stock LiPo batteries to be released in the future. Furthermore, the exterior design and operability have been made as realistic as possible.

Shoot and Recoil Engine
Pulling the trigger activates a 300g weight that mimics a bolt at the same time as the weapon is fired, generating intense recoil that is felt throughout the body. This model is also equipped with an auto-stop system that stops firing when the magazine is empty and a bolt release mechanism that releases the auto-stop by pulling the bolt handle. These features make handling and operation as realistic as possible.

3-Burst Firing
In addition to semi-auto/full-auto firing, the gun also has 3-burst firing, which fires three shots when the trigger is pulled. The selector, which can be operated from either the left or right side, is linked by a shaft that passes the mechanical box, providing smooth rotation and a solid clicking feel.

FET Feature
Equipped with FET (electronic switch) instead of a conventional mechanical switch. Compared to a mechanical switch, the current loss generated at the contact point is reduced, resulting in improved response time from the pulling of the trigger to the firing of the BB round.

M-SYSTEM
The newly developed "M-SYSTEM" is a microcontroller (MCU) unit that comprehensively monitors and controls the FETs, FC (Fire Control), batteries, and motors, monitoring information from seven sensors and various voltages to switch firing modes and control motor rotation. The system also has a safety feature that will stop operation if it detects damage or abnormalities in the various parts of the system.

Silencer as Standard Equipment
The machined aluminum silencer has a rough, grainy coating. The internal sound-absorbing material reduces firing noise. A 14mm reverse threaded muzzle option can be attached by removing the silencer.

Real-looking Replica
The upper receiver and other metal parts are powder-coated with a texture similar to the real firearm. The handguard is made of a resin material with a rubber-like texture, and the lower receiver, butt plate, selector, and cocking lever are molded from reinforced nylon resin that closely resembles the material on the actual firearm.

Improved Rigidity
The cocking handle's component configuration has been reviewed and reinforced nylon resin has been adopted to enable the so-called "HK Slap", which is commonly used to tap back the locked cocking lever. In addition, the sliding retractable stock has a new structure, making it more rigid and realistic looking.

Press-finished Realistic Magazine
Has a 72-round capacity. The magazine has a pressed steel outer case with welded seams all around, just like the real firearm. *Magazine is not compatible with other series MP5 models such as the Standard Electric Gun series.

Package Contents
MP5 SD6 main body
Magazine (72 rounds)
Rear sight adjustment tool
Ni-MH Mini-S battery cover
MS/Li-Po standard-type battery cover
Coupler cover
Protective cap
Handling instructions
Hexagonal wrench
Charger
Charging rod
Cleaning rod
BB pellets (0.2g/200 rounds)
Others